Tag: manufacturing

The Truth About Steel and Steel Targets, Pt. 2

When it comes to steel targets, it is important to understand there are crucial differences in the quality of the steel used to make the targets and the design of the targets themselves. In an age where it seems everyone “knows a guy” who can make steel targets for them out of a welding shop, understanding the facts about steel is even more important. Steel targets can be perfectly safe and a fantastic training tool if done right, but they can also be extremely dangerous if done wrong. Here at Action Target, we have been designing and manufacturing steel targetscart Small and tactical training systems for nearly 30 years. Here are some of the things we’ve learned along the way.

TRUTH – THERE IS A SIGNIFICANT DIFFERENCE IN THE QUALITY OF STEEL BEING USED

Unfortunately, there are steel targets out there that are poorly designed and are made of inferior steel. Homemade targets from local welding shops are usually the culprits, but some commercial target manufacturers use inferior steel as well. Because these targets are vulnerable to cratering, pocking, and general deformation, they are very dangerous and should be avoided. Any steel with a Brinell hardness rating under 400 falls into this category, including standard “T-1” steel with a hardness rating in the 300 range.

LETC 007
Action Target centerfire handgun targets (like this 8″ circle) are all made of 3/8″ AR500 armor steel. Our rifle targets are made of 3/8″ AR550 armor steel.

After many years of experimenting to find the best solution, most major manufacturers of dependable, high quality steel targets now use steel with a Brinell hardness rating of at least 400. A few premium quality manufacturers use steel with a higher Brinell hardness rating of 500 or even 550. Fewer than 10 steel mills in the world can provide quality AR500/550 steel. Action Target has direct relationships with many of these suppliers which allows us to purchase steel mill direct. Steel of this quality is always certified by the plant that created it, however, at Action Target we conduct independent hardness testing on every shipment we receive. If the steel does not meet our ballistic standards, we reject the entire order and send it back.

Other steel certifications like “Magnum Steel” or “Extreme Steel” are merely marketing terms added by the manufacturer. When all the rhetoric is boiled away, there are manufacturers who use steel that is not appropriate for targets, and there are those who use steel that is. Make sure you know the difference.

PROPER DESIGN IS CRITICAL

Even the best steel can’t compensate for poorly designed targets. There are several unavoidable principles that must be followed to create targets that are as safe and durable as possible.

PT Torso (all sides) [web]
All Action Target steel targets are designed for predictable splatter. There are never any exposed bolts, clamps, or brackets on the shooting surface, and the target leans forward slightly to dissipate some of the bullet’s energy.

TRUTH – SMOOTH AND TOTALLY FLAT SHOOTING SURFACES ARE ESSENTIAL FOR CONSISTENT SPLATTER PATTERNS

There are two things manufacturers can do to ruin the smoothness and flatness of a steel target. First, they can use inferior steel that will crater, pock, and deform. Second, they can put brackets, clamps, or bolts in the way of the shooting surfaces. Remember, anything that can be shot will be shot. Why is this an issue? Because you can do a reasonable job of predicting and protecting against a bullet’s splatter pattern when it hits a flat, uniform surface. If the steel is damaged or if anything else is in the way, all bets are off. Bullet fragmentation and ricochet are inherent and acknowledged issues when shooting on steel targets. Proper target design helps you address those issues with the highest degree of safety possible.

TRUTH – DISSIPATING A BULLET’S ENERGY IS SAFER AND HELPS YOUR TARGETS LAST LONGER

When a bullet strikes a steel target that is completely stationary at a 90-degree angle, all the bullet’s energy goes directly to weakening that point on the steel. If the target is completely stationary but is positioned at less than a 90-degree angle, a portion of the bullet’s energy at impact is deflected rather than absorbed. If the target is positioned at slightly less than a 90-degree angle AND the target is able to move on impact, a much larger portion of the bullet’s energy is deflected rather than absorbed.

NO STEEL TARGET IS INDESTRUCTIBLE

Without exception, every steel target out there today can be damaged. Steel hardness and proper design can both be defeated by misuse and/or abuse of the target.

TRUTH – THE BASIC DESTRUCTIVE FORCE GENERATED BY BULLETS STRIKING STEEL TARGETS IS HEAT

Excessive concentrated heat alters the steel’s hardness properties and results in damage to the target’s face. The amount of heat generated is proportional to the speed of the bullet, which is why rifles cause more damage to steel targets than handguns.

TRUTH – RIFLE DISTANCE ON STEEL TARGETS IS NOT AN EXACT SCIENCE

LETC 169
Even though this target is made of AR550 armor steel, shooting too close or shooting with piercing rounds has caused severe damage to its shooting surface.

No matter what anyone tells you, shooting a steel target with a rifle – even at 100 yards – can damage your target, even if it has a Brinell hardness rating of 550. You must be very careful about your choice of steel and ammunition! Even with 550 Brinell steel and the target mounted at a significant angle, some damage is still possible, even at 100 yards. For best results, use only steel targetscart Small that are specifically designed for use with rifles.

With so many complex variables like ammunition type, rifle manufacturer, barrel length, bullet velocity and so on, it is virtually impossible to establish a set distance for shooting rifles on steel targets. To determine what works best with your specific equipment, we suggest the following: Fire a test shot from 100 yards and then examine the target. If there is no damage, move in a few yards and fire another test shot. Repeat the process until you find the optimal distance for your combination of rifle and ammunition. Some people may be comfortable with a certain amount of dimpling on the steel. Minor damage to the shooting surface will not create a shooting hazard if you are shooting at 100 yards, but if can be very dangerous if you choose to shoot at close range with a handgun on the same target. Even if your steel targets have only minimal rifle damage, they should never be used for closer distance handgun training.

TRUTH – SHOTGUN SLUG DISTANCE ON STEEL TARGETS MEANS 100 YARDS MINIMUM

Shotgun slugs have the greatest potential for bodily harm to the shooter due to the sheer volume of lead that can be returned from damaged or poorly designed steel targets. Stay back!

TRUTH – FRANGIBLE AMMUNITION REQUIRES THE SAME QUALITY STEEL AS REGULAR AMMUNITION

Many types of frangible ammunition, particularly for rifles, are lighter than regular lead ammunition. Remember that lighter bullets can mean greater speed, which means more heat, which can mean damage to your steel target. Just because frangible ammunition is designed to break up on impact doesn’t mean the distance requirements do not apply. You should follow the exact same rules with frangible ammunition as you do with any other.

TRUST THE EXPERTS

When it comes to your safety, don’t settle for the advice of your local welder. Steel targets can be fun and safe as long as they are made of quality steel and designed to produce predictable splatter. In fact, steel targets can be one of the greatest tools for firearms training, but they have to be manufactured correctly. Shooting on poorly designed targets made of inferior steel can result in severe bodily harm. Here at Action Target, your safety is our biggest concern. We have decades of experience manufacturing steel targets, and we constantly conduct ballistic research to make sure the steel we use meets our standards and your expectations. If you are looking for a steel target, trust us to point you in the right direction.